H-SW3000 USER MANUAL V1
< 7 >
5
OPERATION
5.1
Preparing for Operation
•
After checking that all the parts are intact and complete, position the machine on flat.
•
Fill the water into water tank when power off. The capacity of water tank is 34 L.
•
Always connect the product to a grounded circuit. Before power on, make sure it is connected with the rated voltage.
•
Turn on the machine, it will immediately start heating up.
5.2
On-device Control Panel
To access the control panel functions, use the four buttons located underneath the LCD display.
Button
Function
<MENU>
Switch menu pages to select a function
<TIMER>
Increases the numeric value of current function
TIMER starts the timer-controlled operation
<VOLUME>
Decreases the numeric value of current function
VOLUME triggers the pump to modify the output volume
<STOP>
Enter enables the currently displayed menu or sets the currently selected value into the
selected function
STOP turns the fog output off
5.3
On-device Control Mode & Operation
5.3.1
Programming
•
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a variable number of programming
levels for each option.
•
To go to the desired main level, press <MENU> repeatedly until the option shows on the display. This will take you to the first
programming level for that option.
•
To select an option or value within the current programming level, press <TIMER>
or <VOLUME>
until the option shows on the
display. If there is another programming level, you will see that first option, or you will see the selected value.
•
Press <MENU> repeatedly to switch menu pages.
•
Press <STOP>
to go back to Standby Page.
5.3.2
Menu Map
Display
Description
Parameter Range
Starting Pages
H-SW3000
Version 1.0
