A3-AG/N3-AG AGRICULTURE KIT 2.0
User Manual
26
©
2019 DJI All Rights Reserved.
Field Editing
Tap any blank space onscreen to enter Edit Status.
1. Edit Waypoints
Move: Drag the waypoint to move.
Fine Tuning: Tap the waypoint to show Fine Tuning buttons. Tap to adjust.
Delete: Tap twice to delete a waypoint.
2. Adjust Route
Route Direction: Tap and drag the icon near the route to adjust the flight direction of the
produced route.
Line Spacing: Tap the icon at the top of the screen to adjust the line spacing between two
neighboring lines.
Collision Avoidance Safety Margin: Tap the corresponding button on bottom of the screen, and
then adjust the safety margin between the route and the edge of the field or obstacle.
3. Edit Obstacles
Tap and hold the marked obstacle or the position that needs to mark an obstacle on the
screen to choose the shape and size of the obstacle in the menu.
Tap the obstacle on the screen which has waypoints added, then follow the Edit Waypoints
instructions to edit the added waypoints for complete obstacle information.
4. Tap Save Field, and then name the operation, choose crop, and configure other parameters.
Performing an Operation
1. Power on the remote controller. Place the aircraft at one of the previously set calibration points
and then power it on.
2. Go to the main screen in the DJI MG app, and then tap Execute Operation to enter the
Operation View.
3. Tap to select a field in “Fields” tag, and then tap Invoke.
4. Tap Rectify Offset and then Rectify Aircraft Position, or adjust the route position via the Fine
Tuning buttons and then tap OK.
5. Tap Start, set operation type, and then tap OK.
6. Takeoff and perform the operation.
1
If you fly to the targeted height, slide to start spraying.
2
If the aircraft is on the ground, slide to takeoff and start spraying.
Be sure to takeoff in open areas.
The operation will be automatically cancelled if the motors are started before beginning
the operation. You will need to recall the operation in the task list.
Once started, the aircraft will fly to the starting point of the route and lock its heading
in the direction of the first turning point for the duration of the flight path. Users cannot
control the aircraft heading via the control stick during the operation.
The aircraft does not spray while flying along line spacing, but automatically sprays while
flying along the rest of the route. Users can adjust operation efficiency (affecting the flying
speed and spray rate) and height above the crops in the DJI MG app.