19
6
Check Harness Height:
Determine which set of
harness slots works best
for your child. Adjust if
needed.
Rethread harness into new
harness slot location.
Make sure harness straps
do not twist.
Press red button on
buckle to release the
buckle plates. Pull buckle
plates out. Place harness
straps over sides of child
restraint.
4
5
Place the child’s bottom
and back flat against the
child restraint.This will
increase comfort and allow
the harness to properly
tighten.
Harness slot being used
must be
even with or
just below
the shoulders.
If the bottom harness slots
are above the child’s
shoulders,
do not
use this
child restraint until the
child grows into it.
Harness
Slot
7
18
From the front of child
restraint, pull harness
straps out.
To change harness
location:
With harness loose, from
the back, remove harness
from the splitter plate.
8
9
10
WARNING
!
Failure to reinstall the harness system correctly
can result in serious injury or death.
From the back of the
child restraint, refasten
the harness straps to the
splitter plate.
NOTE:
Make sure the
harness straps and
harness adjustment strap
are not twisted.
11
continued on next page.
4358-4462B US onBoard 35lb 1/5/11 1:09 PM Page 21
