25
24
Removing Your Child from the
Child Restraint
Loosen harness by pushing
down on the harness
release lever (under flap on
the front of child restraint)
while pulling out on the
harness.
1
Release harness by
pressing the red button on
the buckle. Remove your
child.
3
Press on the chest clip’s
release button and pull
apart.
2
Choosing LATCH or Vehicle Belts
The LATCH System
Anchor bars
Vehicle Belts
If LATCH is not an
option, you will use your
vehicle’s belts. There are
some vehicle belts that
will not work with a child
restraint or will require
special attention. See
next page for specific
instructions.
LATCH means
L
ower
A
nchors and
T
ethers for
CH
ildren. Not all vehicles
manufactured before
September 2002 were
equipped with LATCH.
The LATCH system allows
a child restraint to be
secured in the vehicle
without using the vehicle
belt system and can ONLY
be used in vehicles that
have the anchor bars
installed.
Check your vehicle
owner’s manual to see
which seating positions
may be equipped with the
LATCH system.
The LATCH system can
ONLY
be used when installing
this child restraint rear-facing
WITH
the base.
4358-4462B US onBoard 35lb 1/5/11 1:09 PM Page 27
