32
Lift up belt lock off plate
marked “B”.
4
Open the LATCH storage
door and unhook the
LATCH from the storage
bars. Remove the LATCH
belts from the storage
locations. Completely
close and lock the storage
door.
5
Thread the LATCH hook
through the left side belt
path opening as shown.
6
33
9
Push down
FIRMLY
on
the base and pull up on
the loop to tighten belt.
Tips:
To help in
tightening, pull the loop
end up through the belt
path, then tighten.
Push down and towards
the vehicle seat back to
help get a snug fit.
8
Fasten one LATCH belt
hook to one vehicle
LATCH anchor, then
fasten the second LATCH
belt hook to the second
vehicle LATCH anchor.
Thread the LATCH hook
and adjuster through the
right side belt path
opening as shown.
NOTE:
Make sure
LATCH belt is not
twisted.
7
10
You
MUST
tuck loose
end of the LATCH belt
back through the belt path
hole.
Rear
-Facing Use:
4-35 lbs (1.8-15.9 kg),
32” (81.2 cm) or less.
continued on next page.
4358-4462B US onBoard 35lb 1/5/11 1:09 PM Page 35
