With weakest hand at belt
path, tilt and push the base
forward and back, and
from side to side. If the
seat belts do not loosen,
your child restraint should
be secure.
NOTE:
Some “play” from
front to back or about an inch from side to side is
acceptable. If it moves more, review “Knowing Your
Vehicle Belts” section.
39
38
9
WARNING
!
Using this child restraint in any vehicle
seat where the lap belt cannot be
tightened securely and properly or where
it can be loosened by pulling on it can
result in serious injury or death.
Rear
-Facing Use:
4-35 lbs (1.8-15.9 kg),
32” (81.2 cm) or less.
continued on next page.
B
Thread the vehicle lap or
lap and shoulder belt
combination through belt
path as shown. Buckle
vehicle belt.
6
3
B
Lift up tab marked “A” on
the belt lock off.
5
8
Continue pulling on
shoulder belt or end of
the manual belt while
closing the lock off. With
the lap belt and free end
or shoulder belts inside
the lock off, push down
on the lock off cover and
while locking.
B
7
Push down
FIRMLY
on
the base and pull up on
the loop to tighten belt.
Tips:
To help in
tightening, pull the loop
end up through the belt
path, then tighten.
Push down and towards
the vehicle seat back to
help get a snug fit.
Lift up on the belt lock off
lock.
Remove the lock from the
plates.
Tip:
Push down on the
top cover to help make it
easier to open the lock.
4
4358-4462B US onBoard 35lb 1/5/11 1:09 PM Page 41
