Removing Seat Pad for Cleaning
Pull harness through the
slots from the front.
Unthread harness from
the chest clip.
Unthread harness from
the buckle plate.
WARNING
!
Do not use this child restraint without the
seat pad. Failure to do this can result in
serious injury.
46
1
Remove harness:
Loosen harness by
pushing down on the
harness release lever
while pulling out on the
harness straps.
From the back of child
restraint, remove harness
from the splitter plate.
2
3
Pull the pad off the top and
bottom of the carrier as
shown.
5
Pull buckle through pad.
Pad: Hand wash with warm
sudsy water, rinse clean, air
dry. Do not use bleach or
other harsh cleaners. Do
not dry clean.
Harness Straps: Spot clean
only. Do not machine wash.
6
Remove the pad:
Release the six pad tabs on
the side of the carrier.
To release the tab, pull
down on the pad and pull
the tab out of the carrier.
4
47
continued on next page.
4358-4462B US onBoard 35lb 1/5/11 1:09 PM Page 49
