dixell XWEB5000 EVO, Installation Manual

Page: 11 / 72

XWEB SERIES Installation Guide
1592010850 23/05/2007 Pg. 11/72
It is possible to connect to the unit via a single PC provided with
LAN card, by using the net connector RJ 45 (LAN). Due to the PC-
client power, this kind of connection is more suitable for the setup
procedures.
IMPORTANT: the cable between the Server and the PC must be
with crossing wires (“Bridge Cable”).
The connection procedure from the remote PC is described in deep
in this guide. You may need some changes to your PC network
card, then you will be able to connect to XWEB5000 via Ethernet/
Internet line. Once you have finished setting up your network card,
connection to XWEB5000 is established simply by launching the
Browser and inserting the default IP number of the unit
http://192.168.0.200 into the address bar.
Before reading on, please take a few moments to write down your
PC network setup, there may be a need to change it. If the IP
address of your PC belong to the hierarchy 192.168.0.XYZ (where
XYZ represent a number between 1 and 254), you can reach
XWEB5000 simply plugging in the ne twork cable.