dixell XWEB5000 EVO, Installation Manual

Page: 10 / 72

XWEB SERIES Installation Guide
Pg. 10/72 23/05/2007 1592010850
4 Local connection with monitor, mouse
and keyboard
On rear of the XWEB5000 sockets are provided for a monitor, a
mouse and a keyboard. Please connect all the peripherals before
powering-on the unit otherwise the system may fails to recognise
them. This means that , for example, if you do not plug the monitor
cable in now, you won’t see anything displayed on it later.
The unit can also work without these three elements therefore if the
user intends to work just with the remote, he can definitively remove
them after the setup operations. In any case inside the of
XWEB5000 is loaded a standard browser to allow the user setting
up the unit.
If necessary check the instructions manual of each device
connected to the unit.
The operative procedure to work with XWEB5000 is the same for all
connection methods.