dixell XWEB5000 EVO, Installation Manual

Page: 9 / 72

XWEB SERIES Installation Guide
1592010850 23/05/2007 Pg. 9/72
3.1 The TTL output
The instrument with RS485 on board does not need any kind of
external interface module. For instruments with an external
interface: keep the TTL cable away from power cables or frequency
sources.
The XJ485 external interface must be connected with a TTL cable to
the instrument with TTL compatibility.
3.2 Serial address of the instruments
Each instrument must be defined by its unique address.
Check the address into the
Adr parameter value of each
instruments. Take reference to the instruction manual of the
instrument itself to find the right procedure to enter the programming
and set the value.
The easiest way to work with the category functions is to set the
addresses progressively for similar groups of instruments which
have the same application.