dixell iPRO Operation Manual Download Page 22

Page: 22 / 141

________________________________________________________________________________________________________

1592025400 – Vers. 1.0

- 22

5. HOW TO START

5.1 Ethernet 10/100 connection

With this connection is possible:

•

To connect the iPRO with the personal computer; through ISaGRAF workbench you

download and debug the application.

•

To connect more iPRO; different applications on different iPRO to exchanges

variables.

•

To send mail and sms; you can program your iPRO so that it can sends mail/sms on

time or on demand.

•

To visit your own website; you can program iPRO with your own web site. With a

standard browser, a user can read/write variables.

5.2 Direct connection (between iPRO and PC with a cable)

With this kind of connection is possible to connect directly your personal computer with the

programmable controller iPRO. In this case, you need a standard “Crossover Cable” (cod.

Dixell CAB/WEB/PC). The PC can communicate with the iPRO only if the settings in the

devices are aligned; this means that the PC and the iPRO have to work in the same

network.

The procedure is the following:

iPRO

Cable

(

Crossover)

Summary of Contents for iPRO














































































































































Search results

Summary of Contents for iPRO

Reviews:

Related manuals for iPRO

Brands by name

Popular brands

dixell iPRO, Operation Manual

Search results

Summary of Contents for iPRO

Reviews:

Related manuals for iPRO

Brands by name

Popular brands