dixell iPRO Operation Manual Download Page 83

Page: 83 / 141

________________________________________________________________________________________________________

1592025400 – Vers. 1.0

- 83

10. HOW TO USE THE USB KEY

Through the USB key it is possible download and upload files from iPRO.

First off all it is necessary to set-up the USB key creating the following structure:

If you have more iPRO the structure of your USB key have to be:

FOLDER DESCRIPTION

This is the main folder common for all the iPROs.

This folder, common for all the iPROs, contains the file to update the

microprocessor; it is possible to download the latest version from Dixell website

and the syntax of this file is: “updater-2008090300”.

This is iPRO’s IP folder with inside the files only for the single iPRO. If there are

more iPRO is enough to create more folders with different IP; inside the IP folders

the structure have to be the same.

Folder to download the ISaGRAF application (isadix file – crypted)

Folder to download the Visograph application (up to 5 files)

Folder to download the maps of the application (up to 10 files)

Folder to upload the log file from iPRO

Folder to download the spalt files with parameters for e-mail, sms and dial-in

Folder to download the personal website

File with the parameters of iPRO (IP, Hostname, DNS)

Summary of Contents for iPRO














































































































































Search results

Summary of Contents for iPRO

Reviews:

Brands by name

Popular brands

dixell iPRO, Operation Manual

Search results

Summary of Contents for iPRO

Reviews:

Brands by name

Popular brands