manualshive.com logo in svg

dixell iPRO, Operation Manual

Share
Download
dixell iPRO Operation Manual Download Page 48

                                                                                                                                                                                                                                

________________________________________________________________________________________________________ 
 

1592025400 – Vers. 1.0

 

 

- 48 

- 

The red semaphore            means that the SIMULATION or DEBUG TARGET are running. 

To stop the execution is enough to click on semaphore. 

During the execution of the program we can read, write and lock the variables. 

If you click this icon            the variables will appear; with this window is possible to check 

the status of your application. 

 

 

 

 

 

 

We can force the value of the input; for example we want to switch on the compressor. 

Double click in the box of Logical Value of the temperature: try to insert the value “60” and 

then confirm with “Write”: 

 

 

We are checking the value of our 
variables (Group1) but we can 
also to check the value of all the 
other variables present  

Summary of Contents for iPRO














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands