________________________________________________________________________________________________________
1592025400 – Vers. 1.0
- 82
-
Try to save, close and open again the project.
Now the block is protect and the colour is red.
The exportation and importation are possible but in any case the block will be protected.
Only if you know the password will be possible to remove the protection and open the block.
To remove the password, double click on the function block:
Write the password and confirm; the colour of the block become green.
Pay attention because with this procedure you are able to check the function block but the
password is not yet removed.
To remove completely the password it is necessary to modify again the properties as above.
In this case in enough to write the password in the box here below and confirm.
Now the block is completely unlocked and the colour will be yellow.
