1592022010 Quick reference guide iCHILL 100CX EVO rel. 1.0
14/40
4.
Push
UP
or
DOWN
to
select Pr2 password
5.
Push
SET
and, if the value is correct, the top display shows the first family of parameters
“ALL”
6.
Push
UP
or
DOWN
to select the parameter family
7.
Push
SET
to enter, the bottom display shows the first available parameter label while the top display
shows its value
8.
Push
UP
or
DOWN
to modify its value
9.
Push
SET
to confirm the new value
10.
If necessary, modify others parameter
11.
Push
SET
+
UP
keys together to exit parameters programming
10.3
ENTER
PARAMETERS
PROGRAMMING
LEVEL
PR3
Enter Pr3 “OEM level”:
1.
Push
SET + DOWN
keys together for 3 seconds. The top display shows PAS and the bottom display
shows Pr1
2.
Push
UP
key for 2 seconds and the top display shows Pr2
3.
Push
UP
key again for 2 seconds and the top display will show Pr3
4.
Push
SET
key and the top display shows “0” blinking
5.
Push
UP
or
DOWN
to
select Pr3 password
6.
Push
SET
and, if the value is correct, the top display shows the first family of parameters
“ALL”
7.
Push
UP
or
DOWN
to select the parameter family
8.
Push
SET
to enter; the bottom display shows the first available parameter label while the top display
shows its value
9.
Push
UP
or
DOWN
to modify its value
10.
Push
SET
to confirm the new value
11.
If necessary, modify others parameter
12.
Push
SET
+
UP
keys together to exit parameters programming
11
MENU ( MENU KEY)
Enter the menu:
• press
the menu button;
• press
the UP or DOWN button to select the submenu;
• press
the SET to enter the submenu.
Exit menu functions:
• Press the
menu button or wait the time-out.
Entering the menu, it is possbile to:
•
ALrM
Read and reset the alarms
•
ALOG
Read and reset the alarm log
•
UPL
Upload the parameter into the Hot Key
•
CrEn
Enable
–
disable one or the two circuits
•
COEn
Enable
–
disable one of the compressors
•
Hour
Read and reset the number of compressor running hour
