1592022010 Quick reference guide iCHILL 100CX EVO rel. 1.0
11/40
During the programming: push
once
To enter parameter modification or confirm a value
Push when an alarm is showed in
menù ALrM
To reset the alarm
Push once
To read probes value
Pushing
once
during
the
programming
To change the group of parameters, to change the
parameter, to change the value of the parameter
Push for 1 second during the
programming when the display
visualizes Pr1 or Pr2 or Pr3
1 time shows the Pr2 programming level
2 times shows the Pr3 programming level
Push once
To read probes value
Pushing
once
during
the
programming
To change the group of parameters, to change the
parameter, to change the value of the parameter
Push once
To turn ON or turn OFF the controller (in chiller or
heat pump depending from CF59 parameter)
Push once
To turn ON or turn OFF the controller (in chiller or
heat pump depending from CF59 parameter)
Push once
To enter the function Menu
Push for 3 seconds
To set the clock (only for controller with clock on
board)
Pushing
once
during
the
programming
To exit from a group of parameters
7.1
KEY
COMBINANTION
KEY
ACTION
FUNCTION
+
Push for 3 seconds together
Enter the programming parameters
Only in Pr3 level: push SET and
DOWN key
Select the parameter level visibility Pr1 / Pr2 / Pr3
+
Push once together
Exit the programming parameters
Push 5 seconds in heat pump
mode
Manual defrost
+
Only in Pr3 programming level:
push SET and then the MENU key
In Pr3 defines if the parameter can be modified or
not in the other levels.
