20
Jumper Options and Locations
The cPB-4612 contains a push-button switch on the faceplate and eight jumpers on the component side
of the board. The jumpers are listed and briefly described in the "Jumper Cross-Reference" table below.
Factory default switch settings are shown in the "Default Jumper Settings" figure.
Jumper Cross-Reference Table
Jumper Function
PB1
Reset (push-button on faceplate)
J16-1
BKT-GND to GND
J16-2
+12V to J5-pin D1
J16-3
+5V PMC I/O
J16-4 IMPI
Disable
J17-1 Not
Used
J17-2 CMOS
Clear
J17-3
Disable Onboard Video
J17-4
Manufacture Test Mode
