manualshive.com logo in svg

Diversified Technology CPB-4612, Configuration And Maintenance Manual, Page: 60 / 106

Share
Download
Diversified Technology CPB-4612 Configuration And Maintenance Manual Download Page 60

 

 49

 

8.2.7 Boot 

Order 

The Boot Order Configuration Utility is used to determine the order in which the BIOS will attempt to boot 
from devices.  The BIOS attempts to boot from the devices in descending order beginning from the top of 
the list.  If the device is not bootable, then the next item down in the list is tried.  Removable Devices and 
Hard Disks have further ordering within their category.  The following page describes the configuration 
options.  The ESC key can be pressed during POST to display a boot device menu.  This will over-ride 
the boot order chosen in the CMOS Setup Utility and boot from the device selected. 

 

BOOT ORDER CONFIGURATION SUMMARY 

 

BOOT DEVICE PRIORITY  

1st Boot Device                    

Removable Device

  

2nd Boot Device                   

Hard Drive

 

3rd Boot Device                    

ATAPI CDROM 

4th Boot Device                    

IBA FE Slot 0128 v4110

 

                                                                                                               

ATAPI CDROM DRIVES  

1st Drive                                

SM-TOSHIBA CD-ROM 

 

HARD DISK DRIVES  

1st Drive                                

PM-IBM-DJSA-220

 

                                                        

REMOVABLE DEVICES 

1st Drive                                

USB Disk

 

 

SYSTEM 
SUMMARY 

 

SYSTEM SETUP 

 

HARD DISK SETUP 

 

BOOT ORDER 

 

PERIPHERALS 

 

USB CONFIG 

 

MISC. CONFIG 

 

EVENT LOGGING 

 

SECURITY/VIRUS 

 

EXIT 

 

↑↓

 Select Screen   Enter Go to Sub Screen 

 F1 General Help    Esc   Exit 

Copyright (c) 2004, Diversified Technology, Incorporated 

 

Summary of Contents for CPB-4612











































































































Reviews:

No comments