Operating modes and configuration
ENG
DEU
ENG
48
6.5 Actuator type and heating system
The actuator type (normally closed / normally open) and the heating system con-
nected to the switching relay can be selected under this menu item.
1. Press and hold the setting wheel (E) in order to open the configuration menu.
2. Select the symbol ”
“ and confirm the selection by shortly pressing the wheel
“Unit”
for selecting the drive type (“nc, no”).
3. Select the desired type by turning and confirm selection by pressing briefly-
”ArEA”
for selecting the heating system (“no. 0, no. 1, no. 2, no. 3, no. 4“).
4. Select the desired system by turning and confirm selection by briefly pressing.
The following heating systems are available:
Number:
Meaning
0
Floor heating, standard
1
FBH Low Energy:
2
Radiator
3
Passive convector
4
Active convector
6.6 Programming of heating profiles
Settings for heating and cooling profiles are made and weekly profiles can be
created according to individual requirements under this menu item.
1. Press and hold the setting wheel (E) in order to open the configuration menu.
Summary of Contents for DT5657
