- 40 -
0DT872 01-12-2021
ONCE PROGRAMMING HAS ENDED, SET DIP2 TO OFF
STEP 1
st
level options
Scrolling
Confirm
2
nd
level options
Notes
12
Closing speed
in (Hz)
CHANGE VALUE
The setting of higher values
must be assessed according to
door dimensions and operating
conditions.
13
Service Alarm
YES
NO
RESET?
Restart the service count down
14
Service thresh
CHANGE VALUE
Option available only if YES has
been selected for point 14).
Set value to steps of 1000 cycles
Max 200,000 cycles
15
Enable stop 1-2
YES
If set to YES, opening of the
contact 1-2 STOPS the door.
NO
16
Brake resistance
(default NO)
YES
Set to YES when the door is
supplied with brake resistance.
NO
17
PARAMETER RESET
CONFIRM
Confirm to go back to the
installation menu.
STEP 1
st
level options
Scrolling
Confirm
2
nd
level options
Notes
1
CYCLIC MODE
TIMER OFF
Timer not active
TIMER ON
Timer active
2
TIME UNIT
MIN.
Timer by minuts
SEC.
Timer by seconds
3
OPENING TIME
1 …200
Set the regular time intervals
4
AUTO CLOS.TIME
1….200
Set the time during which the door
remains open
5
TOT
VALUE
Cycle counter
6
RESET CYCLES
RESET?
Cycle counter reset
6.3 Timed opening menu
With door in STOP position and DIP 8 ON you enter the menu CYCLIC MODE. By activating this mode it is possible to set
a timed opening at regular time intervals. Once the mode is set put DIP 8 OFF.
When CYCLIC MODE is active, the display shows every 2 sec:
TOT cycle - count down to next open/OPENING TIME
