- 32 -
0DT872 01-12-2021
SLE
Tx
Rx
ENC
9634
230 V
9635
9635
8457
230V
1
2
3
4
5
6
7
8
Correctly size the line conductor cross-section by referring to the indicated absorption and taking the length and
installation of the cables into account.
9016
8457
15
16
Grey
Black
4.3. CONNECTIONS TO THE CONTROL BOARD
Insert the cablings through the relevant cable glands:
- Encoder - cable gland
1
- SLE (8457) - cablegland
2
- Photocells - cable glands
5
e
6
- Power supply (not provided) - cable gland
8
Connect all the cablings to the control board as shown at
par. 5.1
.
In the event that the door is subject to washing, it is preferable not to insert the cables into closed conduits (pipes or others)
to avoid water stagnation, but provide open supports to house the cables. Fig.16 schematically shows the wiring supplied
and their positioning.
4.2. SLE CONNECTION (PRIMARY SAFETY)
Disconnect and remove from the SLE the cabling 9016. Insert the cabling 8457 and fit the connector on the SLE PCB
(fig.15)
.
Motor (9635)
Brake (9635)
SLE (8457)
Encoder
Photocell RX
Photocell TX
Thermal protection (9634)
Power supply 230V
