Dish Network DVR Satellite System, User Manual

Page: 102 / 147

94
Connecting Your Dish System
Chapter 12
C
ONNECTING
Y
OUR
D
ISH
S
YSTEM
1
Connect two RG-6 coaxial cables between the S
ATELLITE
I
N
1 and S
ATELLITE
I
N
2 ports on
the receiver’s back panel and two available ports on either the switch, LNBF, or DISH Pro
Plus Separator in your existing system.
Note
: If you are installing your receiver in a system with DISH Pro or DISH Pro Plus
LNBFs (and/or switches), you can have as much as 200 feet of cable between the LNBF
and the receiver. You must use RG-6 coaxial cables rated up to at least 2150 MHz.
2
Peel off the blue stickers (found at the beginning of this User’s Guide ) and affix them to the
cables near where they connect to the S
ATELLITE
I
N
1 and S
ATELLITE
I
N
2 connections on
the back of the receiver.
3
Connect the TV to the receiver, using one of the following connections:
• HDMI
• YP
B
P
R
• A
UDIO
/V
IDEO
connection (RCA-type composite connection)
• S-V
IDEO
and L
EFT
/R
IGHT
A
UDIO
• TV S
ET
O
UT
Note
: Make sure the TV is set to the correct input for the RCA-type connection. Refer to
your TV user’s guide for assistance.
4
Connect either a phone line or Ethernet to the receiver so you can order Pay-Per-View
programs, use all of the DishHOME Interactive features, or use other services from DISH
with your remote control.
Note
: You may be able to use a wireless modem jack. However, this product may not
support all the features of this receiver, such as Caller ID. If you have a Digital Subscriber
Line (DSL), you may have to install a DSL filter between the receiver’s back panel
P
HONE
J
ACK
and the telephone wall jack to successfully connect with DISH. You can obtain a filter
from your DSL provider.
For additional information on doing this, see Connecting the Phone Line on page 95.
1-2
3
4
5
6
7
SATELLITE IN SATELLITE IN
Connect receiver
to dish system.
Connect TV
to receiver.
Label
cables
Wait as the system
downloads software
and updates the
receiver. When
finished the
receiver restarts.
Select the
best resolution
for your TV.
Select
Test
and
Save
.
Wait while the
receiver connects
to Ethernet
or Phone.
Continue with the
Installation Wizard,
programming the
remote to the receiver.
Select Continue
when finished.
8
Select
Guide
to
view the Program
Guide,
Live TV
to
view Live TV, or
Preferences
to
establish your
preferences.