236613ACA
SJ3013 & SJ3014 micro
36
Section 4 – Inspections Before Operation
Function Tests
4.3-9 Do a test of the emergency-stop
button on the platform
1.
Pull the
emergency-stop
button on the base
control console.
2.
Turn the
platform/off/base key
switch to the
platform position.
WARNING
Fall hazard. Use the three points of contact
principle when you use the MEWP ladder to enter
or exit the platform. If you do not obey, there is a
risk of death or serious injury.
3.
Use the MEWP ladder to enter the platform.
4.
Close the gate.
5.
Pull the
emergency-stop
1
button on the
platform control console.
6.
Push the
drive
button
2
.
7.
Push the
emergency-stop
button.
8.
Squeeze and hold the
function-enable
switch
3
.
9.
Push the
controller handle
4
to drive forward.
▪
Result:
The drive function does not operate.
4.3-10 Do a test of the function-enable
switch
1.
Make sure the path of intended motion is clear.
2.
Pull the
emergency-stop
button.
3.
Push the
drive
button
2
.
4.
Do not use the
function-enable
switch, and
try to drive the MEWP by moving the controller
handle forward.
▪
Result:
The drive function does not operate.
4.3-11 Do a test of the steer function
1.
Push the drive button
2
.
2.
Squeeze and hold the
function-enable
switch.
3.
Press the
steering rocker
switch
5
on top of
the controller handle to steer left and right.
▪
Result:
The steer wheels turn left and right.
4
5
1
7
3
6
2
8
To
order go
to
Discount-Equipment.com
