- 6 -
Input Characters/Numbers
When operating the system, certain functions may require the user to enter a name or value.
Such cases could be entering the Counter quantity.
To enter an alpha numeric character, use the up or down button to scroll through the numbers or
letters, using the
“ENT”/Enter or “ESC”/Escape button to move the cursor position right or left.
When the entry is complete, move the cursor to OK and press the
“ENT”/Escape button.
The below example is meant to illustrate how to enter a counter value
For example, to enter a quantity of
“199”, do the following
:
a) Press the down button
until “0” is displayed.
b)
Press the “ENT”/Enter button once to move the cursor to the next position.
c)
Press the down button repeatedly until “1” is displayed.
d)
Press the “ENT”/Enter button once to move the cursor to the next position.
e) Press
the down button repeatedly until “9” is displayed.
f)
Press the “ENT”/Enter button once to move the cursor to the next position.
g)
Press the down button repeatedly until “9” is displayed.
h)
Press the “ENT”/Enter button repeatedly to move the cursor to OK. Then, press the
“ENT”/Enter button once to submit the selection and proceed to next step.
When entering a number, the device normally asks for a 4 digit number. If the
desired number is less than 4 digits, fill the leading spaces with 0s (any leading zeros
will be skipped). An example of this would be 0234 (Two hundred and thirty four) or
0010(ten).
Specify Counter:
[ ] OK?