- 22 -
5.4.
Update Firmware
This function will update the software for your system. To update, you need to insert a
manufacturer Certified Update CD into the Reader and select this function by pressing
the “ENT”/Enter button. We strongly suggest you do not upgrade your system’s firmware
unless recommended by the manufacturer.
5.5.
Test Options
5.5.1. Compare
This function is used to perform a bit-by-bit comparison of the master and any number of
duplicates.
5.5.2. Verify
This function is used to verify playability of finished duplicates.
5.5.3. Test Master
Approximately 50% of failures reported by our system are caused by errors in the master
disc which our reader couldn't overcome. This type of failure often leads to the user
unwittingly wasting a great deal of media attempting to duplicate a faulty master. If you
suspect a defective master, use this function to verify the integrity of its data.
5.6.
Manage Accounts
This menu will allow the Administrator to perform user administrative tasks. This feature
is disabled by default. Prior to activating this feature, the duplicator recognizes all users
as the only activated user defined as the administrator. The pre-defined password for
this menu is “0000”.
5.6.1. View User
This menu allows you to view current existing user accounts
5.6.2. Create User
This menu allows you to create additional user accounts with personalized settings.
During this process, you will be prompted to enter a new user name (up to 8
alphanumeric letters or numbers) and user password (a 4 digit number) for a new
account.
5.6.3. Edit User
This menu allows you to change the existing user account's name and password. During
this process, you will be asked to select the existing account and then you will be
prompted to enter the new user name and new user password for the account.
