- 24 -
Appendix A: External Device (USB 2.0/Firewire 1394) Setup Guide (Optional)
*This only applies if you have USB 2.0 or Firewire connections installed
If there’s a switch next to the USB/Firewire Port:
1. Power off your system
2. Set the USB2.0/Firewire
switch to “ON” position at the back of your system (away from
the LED lights)
3. Use a standard USB 2.0/Firewire cable to connect your computer to your system.
4. Power on your system.
5. Your computer will recognize a number of external devices depending on the system you
purchased.
If there is NOT a switch next to the USB/Firewire Port:
1. Use the standard USB 2.0/Firewire cable to connect your computer and your system.
2. Power on your system.
3. Go into menu 5
“Utilities”
4. Go into submenu 10
“USB Connection” or “External Connection”
5. Press up or
down button to change the setting to “ON”.
6.
Press “ENT”/Enter button to submit your selection.
7. The system will either restart by itself or prompts you restart it manually by powering the
system off and back on.
8. Your computer will recognize a number of external devices depending on the system you
purchased.
The above instructions are for enabling the USB/Firewire port. If you wish to
disable the USB/Firewire connection, perform the same instructions except either
set the USB 2.0/Firewire switch to “OFF” or change the USB Connection/Firewire
Connection setting to “OFF”.
Every PC related product has compatibility issues. Even though the USB 2.0/
Firewire connection(s) have been thoroughly tested before the unit was shipped
out of the factory
, there’s still a slight chance that your PC/Mac computer is not
compatible with the unit
’s USB 2.0/ Firewire connection. If that happens, please
contact your PC/Mac manufacturer for possible configuration changes, or try using
the duplicator connected to a different PC/Mac computer.