- 12 -
Mix Audio Tracks
The Reflex duplicator system provides several ways to mix audio CDs from several sources.
The user inserts a source audio disc and selects the desired tracks for compilation, repeating
this process for each source disc as necessary. When the user is satisfied with the selections,
the duplicator will write the tracks to disc in the order they were loaded. This is a Disc-to-Disc
duplication process which will produce a disc suitable for playback or for use as a master for
further duplication.
The following procedures
Please do this cautiously; if any of the Audio CD tracks you wish to mix are not readable due
to scratches or poor quality, the blank CD-R media will be ruined.
Step 1:
Use the up or down arrow button to navigate to the Audio menu, press ENT.
Step 2:
The dusplicator will display the Preparing screen and any empty recording drives
will automatically be ejected to accept blank media:
Or
If either one of the above screens is displayed for more than 2 minutes after you
have placed your master disc or blank disc into the drives, please check the disc
quality.
Step 3:
After you
’ve placed an Audio CD containing the track(s) you wish to copy and a
blank CD-R media in the writer drive(s), please allow 5-10 seconds for the system to detect
them. After they have been recognized, you should see the following screen:
DISCMAKERS X.xx
3. Audio
Preparing
Waiting for Master
Preparing
Waiting for a Blank
Total: 0 Trk 0m: 0s
Track 1: 4m:31s
“Total: 0 Trk 0m: 0s” indicates that you have zero track(s)
selected and it has zero minutes and zero seconds playtime.
“Track 1: 4m:31s” indicates currently you are focusing on
track one of the Audio CD you’ve inserted and has a
running time of four minute and thirty-one seconds.