- 19 -
Chapter 4: Menu Overview
1. COPY
This menu will guide you to make copies of discs. For more information, please refer to
“Make Disc-to-Disc Copies”.
2. ADVANCED COPY OPTIONS
This menu will guide you to make a simulation of the copying process. During this simulation
process, all write once recordable discs such as (DVD-R, CD-R) will be reusable. The
purpose of performing such simulation is to ensure error free duplication.
Due to the physical limitation of DVD+R/RW & BD-R/RE recordable format, you
cannot perform this procedure on these formats. If you do so, you will encounter
a failure messages.
If you are using CD-RW/DVD-RW discs as your blank media during the
simulation, any content that may have been recorded inside those discs will be
permanently ereased.
2.1.
Test + Copy
This menu will guide you to perform the simulation of the copying process and if
everything passes during the simulation, the real copying process will be performed. If
an error is encountered during the simulation, an error message will be displayed and
the copying process will not be initiated.
2.2.
Copy + Compare
This menu will guide you to make copies, after which it will perform an additional
comparison process automatically to ensure data accuracy.
2.3.
Copy + Verify
This menu will guide you to make copies, after which, it will perform an additional
process to verify playability.
3. AUDIO
This process will guide you to mix an Audio CD from various tracks among different Audio
CDs
. For more information, please refer to “Mix Audio Tracks” on page 12.
4. SETUP
4.1.
Select Burn Speed
This menu will guide you to adjust the duplication speed on various duplication job types.
For more information, please refer to "Select the Duplication Speed" on page 10.
