ElitePro Setup Guide
19
STEP 10
DESIGN PRINT IMAGE (LABEL) FOR MEDIA
Note: You must be using an Autograph VI CD Printer in the following steps. If
you are using another printer refer to documentation that came with your printer.
Next you have to prepare a print image that can be used by the DiscJuggler software to print
text or graphics on top of the media. To do this you will have to use the Discus labeling
software provide with the autoloader. Locate the Discus CD Labeling Software CDR and note
the CD key on the CD’s paper sleeve. It is in the format of XXX-XXX-XXX. Minimize the
DiscJuggler software and on the Desktop, click on the Discus CD Labeling ICON. The
following screen will appear. Type in your Discus key and click the OK button. This only needs
to be done the first time you use Discus.
Type in your Discus Key.
The Discus software will open.
When the Discus screen below opens, click on
CD Label
.
