ElitePro Setup Guide
11
Step 5
Installation of Ink Cartridges
When you lift up the front plastic cover of the printer, the ink cartridge holder will slide into the
center of the opening enabling you to replace the ink cartridges.
If the pickarm will not allow the front plastic cover to open, then you may
gently
push the
pickarm
downward
by applying downward pressure at the base of the pickarm where it wraps
around the column.
NEVER
attempt to rotate the pickarm or try to push it downward by
pressing down on the top of it. Doing so will damage the autoloader’s picking mechanism.
Unpack the included ink cartridges. Be sure to remove the tape from the cartridges.
Do not
touch the metal contacts or ink nozzles. Release the latches on the cartridge holders. Place
the ink cartridges in their respective color-coded holders.
The black cartridge goes in the left
slot of the cartridge holder and the color cartridge in the right slot. To secure the cartridges,
close the top of the cartridge holder. You should hear a “snap” sound as they latch back into
place. Close the printer door.
