ElitePro Setup Guide
13
Step 7
Turn the System ON and Boot UP.
Ensure that all the cables are properly connected. Turn on the autoloader by pressing the
power switch
located on the unit’s
front right side
. A small green LED located on the front of
the unit should light up. If not, check to see that the power supply located at the rear of the unit
is turned on and that it is properly connected to a standard working 115V power outlet. The
system will boot up and you will see several different icons on the desktop
Main Startup Screen
(This is an example; units vary with features, etc)
The environment for the autoloader is Windows XP based, all standard functions of XP are
available. Feel free to look around to see the functions of Windows.
