New safety concept
Royal Appliance International GmbH
New safety concept
Remove filler cap after use
1.
Switch off the appliance with the on/off switch after
use (1).
2.
Discharge the remaining pressure by pressing the
steam button (2) until the flow of steam stops.
3.
Allow the appliance to cool for about half an hour (3).
4.
Screw the filler cap counter-clockwise off the water tank
(4).
About children
This appliance is not intended to be used by persons
(including children) with impaired physical, sensorial or
mental abilities or insufficient experience or knowledge,
unless they are supervised by a person responsible for their
safety or have been instructed in the proper use of the
appliance by this person. Keep the appliance out of reach
of people of these groups.
People with sensory problems, especially with reduced
sensitivity for temperature differences, must use great
caution when working with this appliance.
Children should be supervised in order to make sure that
they don’t play with the appliance.
Defective power cord
If the power cord of the appliance is damaged, it must be
replaced by the manufacturer, their authorised service rep-
resentative or a similarly qualified person to avoid danger.
NOTE:
To make your steam cleaner even safer, we have
improved its safety concept from the one in the
comprehensive operating manual enclosed. From this
range onwards your Vapormate has a filler cap with a
safety valve, the handling of which differs to that of the
old cap (see below).
NOTE:
The mains plug must remain plugged in.
NOTE:
If the filler cap cannot be opened after steps 1-3, press
down the red pin in the filler cap (5).
NOTE:
Please also follow these additional instructions.
30
MIN
1
2
3
4
5
G
ii
Einleger Vapormate zum Integrieren in bestehende BDA.fm Seite 2 Dienstag, 11. Mai 2010 3:05 15
