The steam cleaner has a range of very varied attachment nozzles to ena-
ble the most effective and thorough cleaning of different surfaces. First
assemble the accessory adaptor so that these attachments can be
connected to the steam hose. The accessory adapter can be attached
directly to both the steam gun and the end of one or more extension
tubes.
Ensure that the adaptor is firmly
pushed on until it clicks into place
(Fig. 10).
Press in the appropriate release
button and pull apart with a
downward movement to take the
adapter off again.
The detail nozzle may be used on its own for cleaning or may also be
fitted with one of the brush nozzles, the jet nozzle or the 2-in-1 nozz-
le. This detail nozzle is attached using the bayonet principle. Push the
nozzle onto the accessory adaptor and give it a firm quarter turn in the
direction of the arrow stamped on the nozzle (Fig. 11).
Reverse the sequence to take the detail nozzle off again: twist the nozz-
le a quarter of a turn in the opposite direction to the arrow and pull it
off with a downward movement.
Simply push the jet nozzle firmly
onto the detail nozzle to attach it
(Fig. 12). This nozzle makes it
possible to clean hard to reach
places such as corners, joints and
toilets with ease. The jet nozzle
may be removed by pulling it off
with a downward movement.
8
3 Starting Up
3.1.4
Accessory
Adaptor
3.1.5
Detail Nozzle
3.1.6
Jet Nozzle
2-in-1 nozzle Accessory adaptor
Fig. 10
Click
Jet nozzle
Detail nozzle
Metal brush
Nylon brush
Fig. 11
Fig. 12
IM M 388 12 languages.qxd 15.11.2004 18:00 Uhr Seite 28
