The steam hose with steam gun must be connected to the appliance
and the desired accessory must be attached before the Vapormate
can be used. The Vapormate M 388 has an accessories compartment
that houses the detail nozzle, both brush nozzles, the jet nozzle
and the 2-in-1 nozzle. Open the accessories compartment by pulling
the yellow locking handle upwards and lifting the transparent
cover of the accessories compartment off towards the front (Figs. 2
and 3).
Remove the required steam accessory and replace the cover. Slide the
nose of the cover into the recess above the steam socket and press it
down firmly at the back until the cover clicks into place.
First of all connect the steam hose to the steam socket on the front of
the Vapormate M 388. To do this, flip the black cover flap down and
push the connector of the steam hose firmly into the steam socket until
it clicks into place (Fig. 4).
To remove the steam hose, press in both release buttons on the right
and left hand sides of the steam connector and pull it out of the steam
socket (Fig. 5).
6
3 Starting Up
3.1
Assembling the
Accessories
3.1.1
Steam Hose
1
2
Fig. 2
Fig. 3
Fig. 4
Fig. 5
IM M 388 12 languages.qxd 15.11.2004 18:00 Uhr Seite 26
