7
HOW TO OPERATE
Turn Quick Cord
Release for easy cord
removal. Store cord
in cord clip (see
Features - pg. 5) to
keep out of the way
while vacuuming.
1.
CORD RELEASE
2.
Turn the height
adjustment knob to
match the surface
being cleaned.
IMPORTANT:
For
easiest adjustment,
place cleaner in full
upright position.
To release handle, push the
handle release pedal located
on the lower left side of the
cleaner.
4.
HANDLE RELEASE
PEDAL
Move the handle
and adjust it to
the desired
position for (a)
storing the
upright, (b)
operating the
cleaner, and (c)
de-press the
handle release
pedal again to clean under furniture.
NOTE:
Rotating brush could cause area rug fringe to
become tangled within cleaner. Use caution
when vacuuming throw rugs with fringe.
CAUTION: Brush agitator continues to rotate while hose is removed or in use and at all times while cleaner
is on.
Keep hair, loose clothing, fingers, and all parts of body away from brush area while cleaner is on.
Cleaner must be in the upright position to lift the rotation brush off the carpet when cleaning above the
floor.
a
b
c
1.
3.
Plug cord into electrical outlet.
Turn cleaner on by depressing
foot pedal located on the back
left side of the cleaner.
ON/OFF PEDAL
HEIGHT ADJUST LEVER
FLOOR/CARPET
CLEANING
Remove the hose from the
tool caddy.
Cleaner must be in its upright
position to raise brushroll.
2.
Choose any of
the handy
accessories or
use the hose
alone. Simply
push the
a t t a c h m e n t
firmly onto the
end of the
wand or hose handle. To remove tool, twist
and pull apart gently.
ABOVE FLOOR CLEANING
1.
3.
If additional length is
needed, use the
extension wand and
crevice tool. Pull
crevice tool out of
extension wand. Use
extension wand and
crevice tool together
or separately.
Use the carry handle on
the Power Brush Tool
caddy to move the
cleaner from room to
room.
8
4.
EXTENSION WAND
1.
CARRY HANDLE
HOW TO OPERATE: CONTINUED
WARNING:
TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
DIRT CONTAINER & FILTER: REMOVAL & REPLACEMENT
F13
FILTER TYPE
For F13 filter replacement, please call 1-800-321-1134 or visit our website at
www.dirtdevil.com to locate a dealer nearest you.
Press dirt container release
button and remove dirt
container from cleaner.
Click buttons on the base of
the cleaner toward the outside
edges to unlock filter cartridge.
1.
1.
EMPTY DIRT CONTAINER
Hold dirt container over garbage can and
press clean release dirt container button to
empty. Snap dirt container bottom back
into place after emptying.
2.
2a.
REMOVE FILTER
CARTRIDGE
Remove foam filter from filter
cartridge.
3.
Lift filter cartridge out of base
of cleaner.
2.
Tap the pleated filter on the
inside of a garbage can to
remove excess dust and dirt from
filter. If filter is still clogged, rinse
under running water and allow to
dry for at least 24 hours before
replacing in cleaner.
4.
CLEAN PLEATED FILTER
REMOVE FOAM FILTER
