background image

3

Your cleaner contains a thermal protective device to shut off the motor to avoid over-
heating.  If this happens, turn switch off and unplug the cleaner.  Inspect the exhaust,
inlet, and filters for any blockage.  Empty the dirt container and clean filters.  After
approximately 30 minutes the motor will have cooled and the vacuum will be ready to
use. 

Note:

the cleaner must remain unplugged during the 30 minute cooling period.

• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use

in areas where they may be present. 

• Keep the vacuum cleaner on the floor. Only the hand-held vacuum cleaners may

be set on furniture.

• Cleaner must be in the upright position to lift the rotating brush off the carpet

when doing above floor cleaning.

• Do not use an extension cord with this vacuum cleaner.
• Store the vacuum cleaner indoors. Put the vacuum cleaner away after use to 

prevent tripping accidents.

• Using improper voltage may result in damage to the motor and possible injury to

the user. Proper voltage is listed on the cleaner plate.

• Unplug before connecting Power Brush Tool.

SAVE THESE INSTRUCTIONS

WARNING:

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider
than the other).  This plug will fit in a polarized outlet only one way.  If the plug does not fit
fully in the outlet, reverse the plug.  If it still does not fit, contact a qualified electrician to
install the proper outlet.  Do not change the plug in any way. 

CONGRATULATIONS

You are now the proud owner of a Dirt Devil

®

. We trust your new purchase will

bring you many years of satisfaction.

Our company designed and developed this product with you in mind.  

We are very proud of our products and hope that you are equally satisfied
with their quality and performance.

Thank you for your support of Dirt Devil

®

products.

Visit our website at www.dirtdevil.com

4

WARRANTY

To the consumer, Royal Appliance Mfg. Co. warrants this vacuum cleaner to be free of defects in material or
workmanship for 4 years from the date of the original purchase.  Save your original sales receipt to validate
start of warranty period.

If the vacuum cleaner should become defective within the warranty period, we will repair or replace any defective
parts free of charge.  The complete machine must be delivered prepaid to any ROYAL

®

Authorized Sales &

Warranty Service Station.  Please include complete description of the problem, day of purchase, copy of original
sales receipt and your name, address and telephone number.  If you are not near a Warranty Station, call the
factory for assistance in the USA & CANADA: 1-800-321-1134.  Use only genuine Royal

®

replacement parts.

The warranty does not include unusual wear, damage resulting from accident or unreasonable use of the vacuum
cleaner.  This warranty does not cover brushes, bags, flat belts, filters, bulbs or fan damage.  This warranty does
not cover unauthorized repairs.  This warranty gives you specific legal rights and you may also have other rights.
(Other rights may vary from state to state in the USA).

IMPORTANT: USE ONLY GENUINE ROYAL

®

REPLACEMENT PARTS.

NOTE: RETURN WARRANTY CARD TO REGISTER YOUR CLEANER

TABLE OF CONTENTS

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2, 3 
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
How to Assemble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
How To Operate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7, 8

Floor/Carpet Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
Above Floor Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7, 8

Dirt Container & Filter: Removal & Replacement . . . . . . . . . . Page 8, 9
Belt or Brush: Removal & Replacement . . . . . . . . . . . . . . . . . Page 10
Lightbulb: Removal & Replacement . . . . . . . . . . . . . . . . . . . . Page 11
General Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12

Summary of Contents for M110002



















Reviews: