DIRECTTECH Crystal D1000, Manual

Page: 50 / 68

50
Installation:
1. Adopt the outer holes of the telescope rails (attached on the
DIRECTTECH heating panel) to determine the drilling distances
(see pic.2). When assembling the DIRECTTECH heating panel, the
telescope rails can be installed horizontally as well as vertically.
2. After you drilled the holes and equipped them with the appropria-
te mounting material in accordance with local conditions, you can
start with the installation.
3. The telescope rails are pulled out in one direction and through the
outer holes of the telescope rails they are fastened with the wall or
ceiling (see pic.3a). Regarding vertical-facing telescope rails, make
sure that you fi rst fasten the upper holes (see pic.3b).
4. Afterwards, the DIRECTTECH heating panel is pushed in the oppo-
site direction and through the outer holes of the telescope rail the
two screws are each equipped with two square safety splints (see
pic.4) and screwed. It is important for vertical-facing telescope rails
to equip their lower holes (see pic.5) with the square safety splints
to prevent a slipping down of the DIRECTTECH heating panel.
5. For electric installation works the regulations of EN/VDE and of the
local power supply company (EVU) are decisive and those works
should be carried out only by a qualifi ed electrician.
Dismantling:
1. Disconnect the electrical connections according to safety instruc-
tions and technical rules.
2. The dismantling takes place in reverse sequence.
Delivery contents:
• 1 piece DIRECTTECH heating panel
• 2 pieces telescope rails, attached on heating panel (see pic.1)
• 4 pieces square safety splints
Additional accessories:
(not included in delivery)
• in accordance with local conditions appropriate mounting material
InSTAllATIon InSTRuCTIonS
foR DIRECTTECH CRYSTAl & DIRECTTECH mIRRoR
(frameless panels)
Pic. 1
Telescope rails,
pre-assembled
SKETCH
The installation site must provide a suffi cient carrying capacity and strength in accordance
with the weight of the product. Please hereto consult your ceiling installer/architect.