Directed XPRESSKIT GM9 Manual Download Page 12

Page: 12 / 16

Rev.: 20170407

Platform: DBALL2
Firmware: GM9 Range Extender Ready (RXT) Installation v.2.05+

Page 12

LED Diagnostics & Troubleshooting

D2D and W2W Commands

LOCK command received.

Normal operation. If the LED do not flash, it means the
module did not receive the signal. Commands can come
from RF, D2D or W2W.

UNLOCK command received.

TRUNK command received.

AUX1 command received.

Remote Start Shutdown Code

Run safe shutdown.

Brake shutdown.

No key detected shutdown.

Speed detected.

Used to check the installation and for troubleshooting
purposes. Used to check for internal safety operation.
Does not represent an error.

Normal operation.

Flashes
orange
x2

Flashes
red x2

Flashes
orange
x3

Flashes
red x3

Flashes
orange
x4

Flashes
red x4

Flashes
orange
x1

Flashes
red x1

RXT Code

OEM Remote Start Activation was attempted
when RFTD feature is disabled.

Activated from Web automatically when using RXT flash
tool or can be done manually. Refer to Feature
Programming section for more information.

RXT start not possible when OEM system is
disabled.

Refer to the owner documentation to activate it.

RXT start command not executed.

Module received the command, but the car did not
perform the action.

If the bypass module fails to flash, it means the
module did not receive the signal.

If using XL202, make sure that the proper cable is
connected. When using SmartStart make sure that
SmartStart is configured in D2D.

Flashes
green
x7

Flashes
green
x8

Flashes
red x5

Flashes
red x6

Flashes
x7

Flashes
red x8

Summary of Contents for XPRESSKIT GM9

















Search results

Summary of Contents for XPRESSKIT GM9

Reviews:

Related manuals for XPRESSKIT GM9

Brands by name

Popular brands

Directed XPRESSKIT GM9, Manual

Search results

Summary of Contents for XPRESSKIT GM9

Reviews:

Related manuals for XPRESSKIT GM9

Brands by name

Popular brands