15
© 2009 Directed Electronics. All rights reserved.
➢
Programming
To enter:
hold
the
A U
X
button for 8 seconds, the transmit LED turns on, the pro-
gramming main menu has been accessed.
To exit:
press
and
release
the
A U
X
button to go back and repeat to exit. The
transmit LED turns off when programming is exited.
Remote Features menu
Press
and
release
the
button, 2 LED flashes indicate the remote features
menu is accessed.
Press
the buttons as indicated below,1 flash On, 2 flashes
Off:
Autolock feature: Press
•
to turn on/off.
Car 2 feature: Press
•
AUX
AUX
to turn on/off.
The button has no function.
Remote Pairing
Remote pairing is a process where the Responder LE remote, and the in-vehicle
system learn the other's encrypted identification, securing communication
between the two from intruders.
How to Remote Pair
Make sure the remote control is set for the desired Car 1 or Car 2 operation
for the system it is to be paired with.
Placing the system into the remote pair mode:
Turn the ignition to the On position.
1.
Press, release, then press and hold the Control button (on the Control
2.
Center).
The Control Center LED begins to flash and the horn honks once to
3.
confirm the system is in Pair mode, the Control button can be released.
The system will stay in Pair mode for 60 seconds or until the ignition is
turned off. The horn will emit one short and one long honk when it exits
remote pair mode.
