Directed Electronics VIPER 5101 Owner'S Manual Download

Page: 7 / 44

Warning! Safety first

The following safety warnings must be observed at all times:

Due to the complexity of this system, installation of this product must only be

performed by an authorized Directed dealer.

When properly installed, this system can start the vehicle via a command

signal from the remote control transmitter. Therefore, never operate the system

in an enclosed area or partially enclosed area without ventilation (such as a

garage). When parking in an enclosed or partially enclosed area or when

having the vehicle serviced, the remote start system must be disabled using the

installed toggle switch. It is the user’s sole responsibility to properly handle and

keep out of reach from children all remote control transmitters to assure that the

system does not unintentionally remote start the vehicle. THE USER MUST IN-

STALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA

ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT

LIVING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE

STORAGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions

are the sole responsibility of the user.

Remote starters on manual transmission vehicles operate differently than those

with automatic transmission because you must leave your car in neutral. You

must read this Owner’s Guide to familiarize yourself with the proper proce-

dures regarding manual transmission remote starters. If you have any questions,

ask your installer or contact Directed at 1-800-753-0600.

Before remote starting a manual transmission vehicle, be sure to:

Leave the vehicle in neutral and be sure no one is standing in front or

•

behind the vehicle.

Only remote start on a flat surface

•

Have the parking brake fully engaged

•

Warning! It is the responsibility of the owner to ensure the parking/emergency

brake properly functions. Failure to do so can result in personal injury or prop-

erty damage. We recommend the owner have the parking/emergency brake

system inspected and adjusted by a qualified automotive shop biannually.

Summary of Contents for VIPER 5101













































Search results

Summary of Contents for VIPER 5101

Reviews:

Related manuals for VIPER 5101

Brands by name

Popular brands

Directed Electronics VIPER 5101, Owner'S Manual

Search results

Summary of Contents for VIPER 5101

Reviews:

Related manuals for VIPER 5101

Brands by name

Popular brands