User Guide
P. 5
Vehicle
Presets
Heater
When leaving the vehicle it is recommended to preset the accessory controls in preparation for the
next remote start. Settings for the blower motor (fan) should not be left on
HIGH
. It is recommended
to leave the settings on
LOW
or
MEDIUM
instead.
Windshield
Wipers,
Radio
&
Headlights
Certain vehicles energize the radio and / or windshield wipers and / or headlight circuits while
running under remote start. When leaving the vehicle you must ensure that the windshield wiper
and headlight switches are
OFF
. Leaving the headlight switch
ON
on certain types of vehicles could
cause them to remain
ON
even after remote starter shut down, resulting in a dead battery.
Using
the
Transmitter
Your remote starter is equipped with a 6-button, multi-channel, 2-way remote control. It can
operate two independent vehicles equipped with identical remote starters (see Multi-car operation
section on page 20).
LCD
Remote
Functions
The transmitter offers several command-confirmation and timer features. This section explains
some of the key functions available. The next section gives a summary of the button combinations
used to access the functions.
The functions of the transmitter are as follows:
Front view:
UNLOCK Button:
Unlocks all Doors and
disarms the Starter Kill (if
installed)
TRUNK Button:
Activates the Trunk
LOCK Button:
Locks all Doors and
arms the Starter Kill (if
installed)
START/STOP Button:
-Starts or Stops the engine (Normal functions).
-Starts the engine ONLY (if the Auxiliary Button is
programmed as STOP Button).
Auxiliary Button:
Activates
AUX 2, stops the Engine,
sets the Temperature, activates
Panic Mode, activates CWM (if
programmed).
