background image

User Guide

 

P. 15

 

iv)

 

Once the selection is done, press  . 

v)

 

Choose ON or OFF, then press and hold   until; 
(1)

 

The 

 icon appears or disappears to confirm Combo Valet is enabled or 

disabled

(2)

 

The 

 icon appears or disappears to confirm Valet start is enabled or 

disabled

(3)

 

The 

 icon appears or disappears to confirm Valet Alarm is enabled or 

disabled. 

 

The system will warn you if someone attempts to remote start the vehicle while in Combo Valet 
and Valet Start. The parking lights will turn ON then OFF, then flash twice

Panic

 

Mode

 

In an emergency situation, you can activate panic mode by pressing and holding the 

 OR 

 

button until the siren starts to sound. If the vehicle is under a remote start, the engine will shutdown 
automatically before setting off the Siren. You can stop the Siren by pressing 

 OR 

 

 
Furthermore, the panic mode can be stopped by activating Valet Mode (page- 13) 
 
* Panic Mode will automatically shut down after 30 sec. 

Quick

 

LockoutTM

 

(Also called Secure Panic.) For fast protection in emergency situations, the system will LOCK all 
doors when you press the brake pedal while you hear the sound signal. (Quick Lockout is only 
available when panic mode has been set off.) 

Cold

 

Weather

 

Mode

 

If the vehicle has a Manual transmission, Ready mode (page-10) should be set before entering 
Cold Weather. When cold weather mode is active, the engine starts every 2 hours and runs for 3 
minutes (or for 8 or 20 minutes with diesel engines). Cold weather mode automatically ends after 
24 hours. The vehicle must be set in ready mode (manual transmission) before the cold weather 
mode can be activated. 
To enter Cold Weather Mode: 

1.

 

Through advance function remote’s menu (page-6), select L-01. 

2.

 

Press and hold the   button until the 

 icon will appear on the display. 

To exit Cold Weather Mode, do any one of the following actions: 

 

Open the hood. 

 

Start the engine by remote. 

 

Turn the ignition key to the IGNITION ON (RUN) position. 

 

Through advance function remote’s menu (page-6), select L-01. 

 

Press and hold the   button until the 

 icon will disappear on the display. 

To verify whether the system is in cold weather mode: 

The 

 icon should appear on your remote display. 

OR 
Press the brake pedal: 
If the vehicle is in cold weather mode, the parking lights will remain ON while the brake pedal 
is pressed. (Automatic transmission ONLY) 

Summary of Contents for PS-7870TWE-FM























Reviews: