P. 12
User Guide
Intrusion
alert
via
remote
The remote will beep or vibrate for about 60 seconds when an intrusion from door, hood, trunk,
shock or ignition is detected. At the same time, the LCD remote will display “
ALARM
” and “
DOOR /
HOOD / TRUNK / SHOCK /
real time” (depending on the type of alarm) alternately. The icons of door,
hood, trunk and shock, as well as the red backlight, will be flashing (when the
BLITE
is set
ON
).
Alarm Type
LCD Text
Icon
Sound or Vibration
DOOR
ALARM + DOOR
60 seconds
HOOD
ALARM + HOOD
60 seconds
TRUNK
ALARM + TRUNK
60 seconds
SHOCK
ALARM + SHOCK
60 seconds
IGNITION
ALARM + real time
NONE
NONE
The user can press the
or
button to stop the alarm (unless TWO-STAGE Mode has been
programmed – one press then only mutes the siren; the user needs to press twice in order to
disarm the system).
Remote
Starter
Features
Remote
Door
Locks
If your system was installed with the Remote Door Locks option, you will have the convenience of
remote keyless entry.
To UNLOCK your doors and DISARM the system:
1.
Press and hold the
button for approx. 1 sec
2.
The
icon will appear on the remote’s LCD screen
3.
The siren will chirp twice to confirm that the doors have been unlocked, the Starter Kill
feature is disarmed (if it was installed) and that the Alarm is disabled.
To LOCK your doors and ARM the system:
1.
Press and hold the
button for approx. 1 sec.
2.
The
icon will appear on the remote’s LCD screen
3.
The siren will chirp once to confirm that the doors have been locked, the Starter Kill
feature is enabled (if it was installed) and that the Alarm is armed.
Remote
Trunk
Release
If your system was installed with the Remote Trunk Release option, you can open your trunk by
pressing the
button until the remote displays the text “TRUNK” on the screen. In addition, this
will also disarm the alarm.
