P. 14
User Guide
i)
Press the
and buttons simultaneously until the
icon appears on your
LCD remote.
ii)
The LED on the antenna will come ON solid to indicate that the vehicle has
successfully entered Combo valet.
c)
To put the system into Combo Valet mode using the PUSH BUTTON SWITCH:
i)
Insert the ignition key into the ignition switch.
ii)
Turn the key into the ON position
iii)
Within 5 seconds, press the push button switch until the parking lights flash 3
times.
iv)
Release the push button and turn the ignition to the OFF position.
v)
The LED on the antenna will come ON solid to indicate that the vehicle has
successfully entered Combo valet.
vi)
Press any command to refresh the screen; the
icon will appear on your LCD
remote.
2)
To
take
the
system
out
of
Combo
Valet
Mode
a)
To take the system out of Combo Valet mode using the KEY:
i)
Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times
successively into the IGNITION/RUN and OFF positions.
ii)
The parking lights will flash twice.
iii)
Turn the ignition OFF.
iv)
The LED on the antenna will flash quickly to indicate that the vehicle is now out of
Combo valet.
v)
Press any command to refresh the screen; the
icon will disappear on your
LCD remote.
b)
To take the system out of Combo Valet mode using the TRANSMITTER:
i)
Press the
and buttons simultaneously until the
icon disappears from
your LCD remote.
ii)
The LED on the antenna will flash quickly to indicate that the vehicle is now out of
Combo Valet.
c)
To take the system out of Combo Valet mode using the push button switch:
i)
Insert the ignition key into the ignition switch.
ii)
Turn the key into the ON position.
iii)
Press the push button switch until the Parking lights flash twice.
iv)
Release the push button and turn the ignition to the OFF position.
v)
The LED on the antenna will flash quickly to indicate that the vehicle is now out of
Combo valet.
vi)
Press any command to refresh the screen; the
icon will disappear on your
LCD remote.
3)
To
enable
or
disable
Combo
valet,
Valet
Start
or
Valet
Alarm
via
remote:
i)
Through Advanced Options, first press
to select MENU (page-7).
ii)
Choose VALET and press .
iii)
Press
or
to toggle between three kinds of Valet Modes:
(1)
CMVLT = Combo Valet (Starter and Alarm is enabled or disabled)
(2)
VLTST = Valet Start (Only the starter is enabled or disabled)
(3)
VLTAM = Valet alarm (Only the alarm is enabled or disabled)
