Type 9
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of special notes referenced in the diagram (
).
Note:
program for
double pulse
when
flashing.
Ignition Switch
(6-pin connector)
(+) Accessory:
Orange, pin 3
(+) Starter:
Green, pin 1
(+) 12V: White, pin 5
(+) Ignition: Blue, pin 6
16
8
9
1
10: Red: (+) 12V Input
(-) RAP Off Output: White/Violet: 11
(+) Brake Input: Brown/White: 16
9: Black: (-) Ground
Siren
Hood Pin
C-CAN High: pin 6
C-CAN Low: pin 14
OBDII Diagnostic
(connector side view)
(+) Ignition Output:
Pink
(+) 12V Input: Red
(+) Accessory Output:
Orange
(+) 12V Input: Red
(+) Starter Output
(to starter): Violet
The Remote Start
Safety Override
Switch MUST be in
the ON position.
Remote Start Safety
Override Switch
(-) Unlock Output: Dark Blue: 7
(-) Lock Output: Dark Green: 15
Refer to the Vehicle
wiring reference chart.
(-) Hood Input: Gray: 3
(+) Siren Output: Brown: 17
Starter Input
(from key switch): Green
(-) Parking Light Output: Green/Black: 10
(-) Disarm Output: Lt. Blue/Black: 13
Immobilizer Data Interrupt (connector side): Yellow/Black: 2
Immobilizer Data Interrupt (vehicle side): Orange/Black: 3
HS CAN Low: Tan: 4
HS CAN High: Tan/Black: 5
11: Orange/Yellow:
Immobilizer Data Interrupt
(vehicle side)
6: Yellow:
Immobilizer Data Interrupt
(connector side)
OR
Connector
EMS COM connections are only needed
if the vehicle has a transponder/immobilizer.
Refer to the Vehicle wiring reference charts section for
the connector, pin and wire color in your specific vehicle.
1 - Immobilizer behind fuse box
White 8-pin connector
2 - Immobilizer behind fuse box
White 5-pin connector
5
6
7 White
4 White
8 thick-gauge wir
es
MC501
C-CAN wires MUST be
connected for proper
operation.
35
Directed Digital Solutions HKHT1
© 2020-03-03 Directed. All rights reserved.
