Type 7
without
OEM alarm
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of special notes referenced in the diagram (
).
16
8
9
1
HS CAN Low: Tan: 4
HS CAN High: Tan/Black: 5
C-CAN High: pin 6
C-CAN Low: pin 14
9: Black: (-) Ground
10: Red: (+) 12V Input
Refer to the Vehicle wiring
reference charts for wire
and connector details
related to the standard
connections in the vehicle.
OBDII Diagnostic
(connector side view)
C-CAN wires MUST be
connected for proper
operation.
(-) Hood Input: Gray: 3
Hood Pin
Siren
The Remote Start
Safety Override
Switch MUST be in
the ON position.
Remote Start Safety
Override Switch
(+) Siren Output: Brown: 17
EMS COM Data (connector side): Yellow/Black: 2
EMS COM Data (vehicle side): Orange/Black: 3
11: Orange/Yellow: EMS COM Data
(vehicle side)
6: Yellow: EMS COM Data
(connector side)
(-) Lock Output: Dk. Green: 15
(-) Unlock Output: Dk. Blue: 7
(+) Brake Input: Brown/White: 16
7 White
4 White
8 thick-gauge wir
es
MC501
(+) Ignition Output:
Pink
(+) 12V Input: Red
(+) 12V: Black, pin 5
(+) Starter:
Black/Yellow or
White, pin 1
(+) Ignition:
White/Blue or Blue,
pin 6
(+) Accessory:
White or Orange,
pin 3
(+) Accessory Output:
Orange
(+) 12V Input: Red
(+) Starter Output
(to starter): Violet
Starter Input (from
key switch): Green
(-) Parking Light Output: Green/Black: 10
(-) RAP Off Output: White/Violet: 11
OR
2 - EM01, Gray 39-pin connector
15
15
24
1 - EM01, Blue 39-pin connector
OR
3 - EM31 or EM21, White 33-pin connector
23
21
Connector
EMS COM connections are only needed
if the vehicle has a transponder/immobilizer.
Refer to the Vehicle wiring reference charts section for
the connector, pin and wire color in your specific vehicle.
Cut
Ignition Switch
(6-pin connector)
28
Directed Digital Solutions HKHT1
© 2020-03-03 Directed. All rights reserved.
