Rea
r-
F
a
c
in
g
I
n
st
a
ll
a
ti
o
n
33
Rear-facing SuperLATCH™ Installation (cont.)
Slide the SuperLATCH™ through
the opening above the rear-facing
belt path label which is on the
lower portion of the car seat.
Be sure the SuperLATCH™
strap is fl at and not twisted.
Adjustment strap should be
on the child’s right side of
car seat.
Place car seat so that both
the seat bottom and feet of
the detachable base are fl at
on the vehicle seat. Front of
car seat should be up against
back of vehicle seat.
Connect both SuperLATCH™
connectors to the correct
lower anchors in the vehicle
seating position. The red
button will “click” and pop
up to confi rm secure
attachment to anchors.
Red buttons should be
facing upward for correct fi t
and easy access. To release,
press the red button. Red
button will stay down when
not in use.
Push down in the middle
where the child sits, while
tightening the SuperLATCH™
strap. To check for a tight fi t,
grab the seat near the label
that states “rear-facing belt
path” with one hand and
give it a moderate tug. It
should move less than
1 inch side-to-side,
back-to-front.
Tip:
If available, add the rear-facing top tether connector strap
to the appropriate anchorage and attach the top tether strap
(
See page 38 for installation instructions
).
4.
5.
6.
3.
Summary of Contents for Radian R120
Page 13: ...13 9 12 13 14 10 11 16 15 18 19 22 21 20 23 17...
Page 62: ...Notes 62...
Page 63: ...Notes 63...
