Diono Radian R120, Instruction Manuals

Page: 19 / 64

Sa
fe
ty
19
Infl atable Seat Belt:
Currently this car seat is compatible with only Ford Motor Company's
Infl atable Seat Belts for all installation modes and booster mode.
Consult your vehicle owner's manual for more information.
If your seat belt is one of the types listed above, choose another
seat within the vehicle or use LATCH connectors and anchorage
points. Information on the types of seat belts in your vehicle are
in the vehicle owner’s manual. See Lower Anchor weight limits for
each mode of installation (
See pages 32 and 41 ).
UNSAFE vehicle seat belt systems:
DO NOT use the following types of seat belt systems with the car seat.
Install the car seat with the LATCH system or in another vehicle seating
position equipped with a safe vehicle seat belt system.
Lap and shoulder belts with anchorage points
attached to the vehicle door.
Motorized lap/shoulder belts.
Non-locking lap belts with Emergency Locking
Retractor (ELR).
Important: DO NOT use this type of
vehicle belt if a secure installation
cannot be achieved.
Belts with anchor points forward of the seat crease may or may not allow
for secure installation. Check for movement of the seat after tightening.
Vehicle Seat Belt Systems (cont.)
Lap belts with switchable retractors or Automatic
Locking Retractors (ALR).
• Switchable retractors can be switched from
non-locking to locking mode. Most switchable
retractors are switched by fully extending the belt,
after which the belt can retract, but will not extend.
• ALRs allow the belt to be pulled out freely until it is
allowed to begin to pull back in, after which the belt
will not extend.