Operating Instructions UVD 170S/340S
10
Tab Dialog Box "Signals"
Option
Description
UV_VIS_1
UV_VIS_2
UV_VIS_3
UV_VIS_4
3DFIELD
UVD 170S / UVD 340S
UVD 170S / UVD 340S
UVD 170S: from CHROMELEON
TM
v.4.10 / UVD 340S
UVD 170S: from CHROMELEON
TM
v.4.10 / UVD 340S
only UVD 340S
Important:
Ensure that the check boxes of the required channels are activated. If not,
these channels will not be available in CHROMELEON
TM
.
Select the required signal, and press "Change" to view the following signal parameters:
Signal parameter
Description
Signal Name
Signal name
Unit
Signal unit of the recorded raw data
Factor
current amplification factor
Tab Dialog Box "Error Levels"
In this box you can view the classification of errors in certain error levels. The default settings
must not be altered.
Tab Dialog Box "Inputs"
Option
Description
INPUT170
INPUT340
only UVD 170S
only UVD 340S
Important:
Ensure that the check boxes corresponding to the remote inputs are
activated. If not, these inputs will not be available in CHROMELEON
TM
.
Finally, save the modified Server Configuration. Close the CHROMELEON
TM
Installation
Tool.
