Operating Instructions UVD 170S/340S
4
2.2.1 Fuse Replacement
•
Switch off the unit and disconnect the power cable,
•
draw out the fuse cartridge using a small screwdriver (
→
fig. 1),
•
replace fuses as appropriate.
Important:
Only use fuses as indicated in fig. 1 (min. voltage 250 V) or those listed
in the original parts list.
•
If using US-type fuses, follow the procedure shown in fig. 1.
•
Replace the fuse cartridge.
Fig. 1.: Removing the fuse cartridge from the power supply module
Fig. 2: Voltage selection
